7 replies to this topic

[Misant]

Hello,

 

My big world setup installation gave me this warning during install :

WARNING: file "setup-refinements.tp2" does not exist (this is the file targeted for patching in "SETUP-

REFINEMENTS.TP2.PATCH" in "Big World Fixpack/refinements").  This might mean you did not extract all of the files 

of the mod, or it might mean that the patches for this mod were made for a different version of the mod than the 

version that you are using (you would see this message if the version you are using moved or renamed the tp2 file).

 

Do you want to try to apply other patches for this mod anyway?  If a target file is different from the original 

file that was used to create a patch, the patch might fail completely (making no changes) or it might fail 

partially (making some changes) or it might succeed with "fuzz" (if all of the lines to change are still in the 

file, but some other lines were added in between).  If partial patching occurs, the mod might fail to install or 

manifest other problems later.  If in doubt, please visit one of the modding forums and ask for help.

[Enter Y if you want to try patching anyway, anything else to skip patching this mod.]

 

 

I stopped the install and removed BG folder to start again a fresh install if someone know how to fix this.

 

The component selection in attachement (.txt format because can't upload .ini)

 

EDIT :

 

I searched a little and found some usefull information (I think) :

 

In the readme I found this :

Alternatively the files can be extracted from the archive using WinRAR. If properly extracted, you should have a Refinements folder, setup-Refinements.tp2 and Setup-Refinements.exe in your BG2 folder. To install, simply double-click Setup-Refinements.exe and follow the instructions on screen.

 

I put installer on pause after extract and I saw :

 

setup-refinements.tp2 in D:\Baldur's Gate Trilogy\Baldur's Gate 2\refinements

 

I put it in 

 

D:\Baldur's Gate Trilogy\Baldur's Gate 2

 

After resume I had a new message :

WARNING: File "setup-refinements.tp2" contains 'VERSION ~beta 4.05~' instead of expected 'VERSION ~Refinements v 3.31~'!  This is the file targeted for patching in "SETUP-REFINEMENTS.TP2.PATCH" in "Big World Fixpack/refinements".  This might mean that the patches for this mod were made for a different version of the mod than the one that you are using, or this might mean that the mod was already patched and then removed from the list in the "BWP_Fixpack.installed" file without restoring the original pre-patched files.

 

Do you want to try to apply the patch anyway?  If the target file is different from the original file that was used to create the patch, then the patch might fail completely (making no changes) or it might fail partially (making some changes) or it might succeed with 'fuzz' (if all of the lines to change are still in the file, but some other lines were added in between).  If partial patching occurs, the mod might fail to install or manifest other problems later.  If in doubt, please visit one of the modding forums and ask for help.

 

[Enter Y if you want to try patching anyway, anything else to skip patching this mod.]

 

 

I'm not using EET, so what can I do ?

 

- Is the beta 4.05 already fixed so I should just say no and skip the fix ?

 

- Should I answer yes ?

 

- Should I donwload manualy the v 3.31, remove the 4.05 files after extract and extract manually the 3.31 and resume ?

 

Thanks for your help.

 

nb : I hope it's the good place to report this, if not please tell me.

Attached Files

•  BWS-Selection.txt   12.54K   204 downloads

Edited by Misant, 07 February 2017 - 08:49 AM.

[subtledoctor]

1) @agb1: What does the BWFixPack actually patch for Refinements? I could implement it in v4... or, did I do that already?

2) @Misant: Where/when did you get Refinements 4.05? I think it's up to 4.08. Or, do you have 4.08 and I just neglected to update the version # in the .tp2?

[subtledoctor]

Okay I've accepted the pull request from Isaya (sorry I didn't notice it for a while) so the mod should be using HANDLE_CHARSETS and have a working French translation.  The version number was thoughtfully updated to 4.09 by Isaya and the Weidu version updated to v240. 

 

I also confirmed that the BWFixpack changes to v3.31 are already incorporated into the v4 releases, so BWFixpack does not need to touch the v4 releases at all. 

 

I also issued a new proper release on Github so BWS should be using the new version automatically. 

 

Cheers

Edited by subtledoctor, 15 February 2017 - 06:56 PM.

[The Imp]

Okay I've accepted the pull ...

But you didn't accept mine, this: https://github.com/s...ts/pull/1/files
Any particular reason as to why ? The last time I looked at the numbers, they should be accurate.

Edited by The Imp, 16 February 2017 - 02:17 AM.

[subtledoctor]

Jarno I think your pull request was from a very early version. If I'm not mistaken it is actually the same change that the BWFixPack does. Which, as I said, I already integrated into the mod.

If I'm mistaken (always possible) I'll take another look at it.

[The Imp]

Shrugs.

Go back and look at the %&¤# file:

IT'S NOT updated. The circled numbers should all be ZEROes.

[subtledoctor]

Weird, I fixed that a long time ago, maybe my change never got pushed to Github. And then my internal version got overwritten by the recently merged fil from Isaya. Will fix when I can.

[Roxanne]

oops wrong topic

Edited by Roxanne, 26 February 2017 - 02:52 AM.