9 replies to this topic

[web2air]

I found the inconsistence of Jaheira's spell.

She, in Jahei12b, jahei14. cre file, has remove fear spell. She should not because it is a priest spell.

Jaheir4.cre has command spell. Also a priest spell. It should not be there.

The last one is rather minor, or compatibility issue. Jaheir6.cre has Zone of Sweet Air, and this spell is removed by BG2 Fixpack, which says Druid should not have that spell. I do not know why, but here is the thing.

If you install BGT after BG2 fixpack, then you will have this inconsistence. Only one (Jaheira6.cre) has this spell while others not. So I think it should be somehow handle either by BGT side or BG2 Fixpack. Since I feel more close to BGT, I decided to put it here If you think this issue has nothing to do with BGT, then it's fine too.

Great work! There will be the final version of BGT soon because it seems that no more additional bug is likely to be found.

[web2air]

One more thing, I know you fixed some soundset problem for Minsc in BGT side. I corrected it by putting the proper number in dialog.tlk of BG1 Korean version. And I just finished my new installation with BGT 1.03 and it seems that the problems is still there, well, the wrongsoundset is different from the old ones. Can you tell me how you fix this and it will be effective? Simply changing the soundset numbers in dialog.tlk files doesn't seem to work here.

Edited by web2air, 13 February 2007 - 10:23 PM.

[Ascension64]

She, in Jahei12b, jahei14. cre file, has remove fear spell. She should not because it is a priest spell.

Jahei14.cre is used by ToB, so I won't do anything about that. Jahei12b doesn't seem to be used at all. Also, it is a SoA file, so I wouldn't do anything to that either.

Jaheir4.cre has command spell. Also a priest spell. It should not be there.

I don't know who put that there, but she shouldn't have that at all (not even in BG1). I'll remove this, thanks.

The last one is rather minor, or compatibility issue. Jaheir6.cre has Zone of Sweet Air, and this spell is removed by BG2 Fixpack, which says Druid should not have that spell. I do not know why, but here is the thing.

If you install BGT after BG2 fixpack, then you will have this inconsistence. Only one (Jaheira6.cre) has this spell while others not. So I think it should be somehow handle either by BGT side or BG2 Fixpack. Since I feel more close to BGT, I decided to put it here If you think this issue has nothing to do with BGT, then it's fine too.

Well, in BGT-WeiDU, only Jaheira at level 6 has access to level 3 druid spells, so if you use a lower level and she levels up, but the spell has been removed from the spell tables by BG2 Fixpack, then Jaheira won't get it. Thanks for reporting, I'll preserve compatibility with this one.

Great work! There will be the final version of BGT soon because it seems that no more additional bug is likely to be found.

That's ideal, but I wouldn't believe, i.e. I will NEVER name a version FINAL.

[OldVeteran]

I also noticed something rather odd today but I am not 100% certain its due to BGT, but since its in the BG1 portion I am guessing it is as this is a clean new run I am playing on.

The problem is as follows:
Whenever my protagonist, wiedling the cursed berserker sword, entered the spider cave where chelak's corpse is, she would go into auto.berserk mode and after killing that obese woman in the center would be permanently stuck in berserk mode.
I tried this out in many variations, such as sending her in all alone (the web effect is really annoying btw), sending her in with the whole party and sending her in when everyone besides the woman was dead (and no web effect present)

After entering berserk mode, she would never come out of it again, basically breaking the game completely.

The only workaround I found for this was to send anyone but her inside, cleaning it out completely and moving on. Its sure annyoing though.

Figure its due to BGT?

[pro5]

Minor inconsistency with BGSW2H07.ITM (Two Handed Sword +3: The World's Edge):

it uses incorrect BAM from bg2 version of SW2H07 (Harbringer +3):


BG1 and Tutu versions of this BAM (correct one):

[web2air]

One more thing to add, minor inconsistency with BG2 Fixpack.

Viconia61.cre has Holy Smite and Summon insect in LV3 spell. These spells are removed by BG2 Fixpack, so I think they should also be removed by BGT because Viconia is transferable to BG2 from BG1 in BGT

[web2air]

I found one more in BG1 part.

In the original BG1, Drizzt does not wear a helmet. But in ar3100 of BGT, he, Drizzt.cre, wears the weird-looking helmet, helmet15.itm. It should be instead a helmet that you cannot see and not removable such as helmoan.itm.

Also, in BG1, he was very fast. I believe his moving speed was at the same rate as one with the boot of speed. In BGT, he still has his own speed boot, but he does move at the same rate as the other NPC with no speed boot. So I think his speed boot is somehow not correctly converted.

I fixed this by giving him a invisible, non-removable helmet, and fixing the moving rate of his boot of speed with DLCT.

Keep up good work~

[web2air]

One more bug in BG1 part, AR3900

The party of four women assassins tries to kill you in this area. I went to this area before I killed Mulahey so there was not the party as suppoed to be there. I checked the AR3900.BCS, and concluded that only if Mulahey is already dead they will show up.

Then after killing Mulehey, I went to there again, but the party did not show up. It has something to do with Global and AR3900.bcs, I guess. Here is following:

IF
Dead("Mulahey")
Global("LamalhaSpawn3","GLOBAL",0)
THEN
RESPONSE #100
Activate("LAMALHA")
Activate("MANEIRA")
Activate("TELKA")
Activate("ZEELA")
SetGlobal("LamalhaSpawn3","GLOBAL",1)
END

IF
!Dead("Mulahey")
Global("LamalhaSpawn4","GLOBAL",0)
THEN
RESPONSE #100
Deactivate("LAMALHA")
Deactivate("MANEIRA")
Deactivate("TELKA")
Deactivate("ZEELA")
SetGlobal("LamalhaSpawn4","GLOBAL",1)
END


The BCS file seems to be an original one from BG1, but I do not know In the original BG1 whether they will not show up if I have been in this area before killing Mulahey. But, I think it does not make sense if they dont just because I went to there before killing Mulahey. They should be showing up if I killed Mulahey whether I went to there before killing him or not. I simply fixed this deleting the following line, Global("LamalhaSpawn3","GLOBAL",0), then it goes,

IF
Dead("Mulahey")
THEN
RESPONSE #100
Activate("LAMALHA")
Activate("MANEIRA")
Activate("TELKA")
Activate("ZEELA")
SetGlobal("LamalhaSpawn3","GLOBAL",1)
END

IF
!Dead("Mulahey")
Global("LamalhaSpawn4","GLOBAL",0)
THEN
RESPONSE #100
Deactivate("LAMALHA")
Deactivate("MANEIRA")
Deactivate("TELKA")
Deactivate("ZEELA")
SetGlobal("LamalhaSpawn4","GLOBAL",1)
END

So, now I have in my save game both SetGlobal("LamalhaSpawn3","GLOBAL",1) and ("LamalhaSpawn4","GLOBAL",1), but I dont think it will be any problem.

Edited by web2air, 21 February 2007 - 12:47 AM.

[Thauron]

Actually both these scripts won't interact with eachother, since they use different variables - you deleting that one line shouldn't make a difference either - unless some other script caused LamalhaSpawn3 to become 1 without reactivating the four ladies or something is resetting LamalhaSpawn4 back to 0 without any reason these scripts should work fine. Or am I being stupid here?

[Ascension64]

The script looks fine, but there may be some sporadic issues with it; probably due to bad engine concurrency coding. I will note it down but can't really 'fix' it per se.